Reset Fix Firmware Xerox WC-3025BI

Instraction for Install Fix Firmware Xerox WC-3025NI (V_NI, DN, DNI)

To create Fix firmware Samsung Xpress Series necessary to know:  

  • Model (correctly a model is indicated on the corps of printer, but not in a report!),
  • S/N (Series Namber);
  • CRUM (chip cartridge);
  • Version Firmware.

This infirmation can be found the printing: Configuration Report and Supplies Information Report.

Bring in the data obtained from reports in "Form of Order" in the right column of this page and push the button " Order Now".


Printing of report of Xerox WC-3025NI (V_NI, DN, DNI)

Printing reports Samsung Xerox WorkCentre 3025NI (Firmware NI and BI are not compatible)

Print Configuration Report and Report Supplies Information Xerox WorkCentre 3025 the NI: press the [I] button to locate {Inf. } page press [OK] - pressing the [Down] to find: {Configuration} press [OK] to ask the printer: {print} press [OK]?. Prints configuration report which contains the firmware version and serial number of the printer.

If the MFP is locked and does not want to print reports from the printer menu, printing is possible with the service menu. To access the service menu! Very quickly, consistently! Press: [Menu (strelaka left)] [#] [1] [9] [3] [4] - vvedida code (typically 1111) - Press [the OK] - Press [Down] - Find: {Report} - press [OK] - {Configuration} - click [OK] - the printer will ask: {Print?} - {Yes}, press [OK]. Prints configuration report which contains the firmware version and serial number of the printer.

CRUM cartridge number can be found in the Report Supplies Informatio.

Сompatibility Fix Firmware

Models
Firmware
Сompatibility
WC-3025NI (v_NI, DN, DNI) V3.50.01.08-11 V3.50.01.08

Install FIX Firmware Xerox WC-3025NI (V_NI, DN, DNI)

In the got archive

by firmware Xerox WorkCentre 3025 NI InstructionsStage 1. Enter the printer in forced mode and flash the original firmwareBefore FIX firmware you must first flash the original printer firmware - extract the archive with the original firmware. Then enter the printer in forced download mode. To do this, the printer is off, press and hold the yellow button "Clear All". Turn the Power button. Release the Power button and press the yellow button "Clear All". Press once again the yellow button "Clear All". If successful, the entrance to the forced flash mode on the printer screen will be written Wait image. Then drag the mouse WC3025_V3.50.01.08.hd firmware file on usbprns2.exe. Wait until the printer restarts. After restarting the printer proceeds to step FIX firmware.Stage 2. introduce in enforcing mode. Sew the first printer firmware fix file.Wait until the printer restarts.Stage 3. introduce in enforcing mode. Sew a second printer firmware fix file.Move the mouse a second firmware file 2_FIX_NU_xxxxxxxxxx_WC3025_V3.50.01.08.hd FIX on usbprns2.exe. You will see a black window with running points, which will disappear after a few seconds. After that, the unit will begin to be sewn. Wait for the printer or MFP restarts.Stage 4. Cover the contacts of the chip on the cartridge, or remove the chipAfter rebooting, remove the chip and do not allow the installation of other chips! The toner level will always show 100%.


Caution!!! After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.

 

ATTENTION!

The successful install fix firmware is guaranteed only with an original chip in a cartridge!

To Order Fix