Reset Fix Firmware Samsung SL-M3370, SL-M4070

Instraction for Install Fix Firmware Samsung Xpress  SL-M3370FD, SL-M3375FD, SL-M3870FD, SL-M3870W, SL-M3870FW, SL-M3875FD, SL-M3875FW, SL-M3875HD, SL-M4070FR, SL-M4072FD, SL-M4075FR


To create Fix firmware Samsung Xpress Series necessary to know:  

  • Model (correctly a model is indicated on the corps of printer, but not in a report!),
  • S/N (Series Namber);
  • CRUM (chip cartridge);
  • Version Firmware.

This infirmation can be found the printing: Configuration Report and Supplies Information Report.

Bring in the data obtained from reports in "Form of Order" in the right column of this page and push the button " Order Now".


Printing of report of Samsung Xpress   SL-M3370FD, SL-M3375FD, SL-M3870FD, SL-M3870W, SL-M3870FW, SL-M3875FD, SL-M3875FW, SL-M3875HD, SL-M4070FR, SL-M4072FD, SL-M4075FR

From Menu:

MENU->SYSTEM SETUP->REPORT->CONFIGURATION>YES   - (standard)

MENU->SYSTEM SETUP->REPORT->SUPPLIES INFORMATION->YES  - (standard)

Can happen so, that the resource of chip is fully used up and instead of CRUM- of number you will see inscription of "Please replace". In this case  printing of report is possible from service menu. (Teach Mode).

From TEACH MODE:

[ Menu ] [ # ] [ 1 ] [ 9 ] [ 3 ] [ 4 ] [ Menu ] [Report] [Configuratuon] ->
[ Menu ] [ # ] [ 1 ] [ 9 ] [ 3 ] [ 4 ] [ Menu ] [Report] [Supplies] ->

At the complete blocking of vehicle, for printing of report it is necessary to replace a chip in a cartridge on the original working.

After Reset is necessary only refill toner cartridge.

Сompatibility Fix Firmware

Models
Firmware
Сompatibility
SL-M3370FD, SL-M3375FD, SL-M3870FD, SL-M3870W, SL-M3870FW, SL-M3875FD, SL-M3875FW, SL-M3875HD, SL-M4070FR, SL-M4072FD, SL-M4075FR
V4.00.01.04-30

V4.00.01.16-30

Install FIX Firmware reset Samsung SL-M4070

In the got archive

1. you connect a printer to the computer, wait an exit in readiness of vehicle (driver on a printer to set not necessarily)

2. Carry a mouse the file of sewing of FIX _ NU _ xxxxxxxxxxx _ SL - M3870 _ V4.00.01.29.hd on usbprns2.ехе Must be opened cantilever with hurrying points. 

3. Wait till, while Mono Multifunction will be overloaded (Attention! Do not turn off a feed to the restart of vehicle.) 

After a restart Mono Multifunction will be able to work without a chip on a cartridge. The level of toner always will show 100%%.

Attention! For these models of Mono Multifunction updating of sewing it is recommended to produce from the mode of readiness.


Caution!!! After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.

 

ATTENTION!

For these models of Mono Multifunction updating of sewing it is recommended to produce from the mode of readiness.

The successful install fix firmware is guaranteed only with an original chip in a cartridge!

To Order Fix