Reset Fix Firmware Samsung SL-M3320

Instraction for Reset Fix Firmware Samsung SL-M3320ND, SL-M3325ND, SL-M3820D, SL-M3825D, SL-M4020ND, SL-M4025ND.

Order Fx Firmware:

To create Fix firmware Samsung Xpress Series necessary to know:

  • Model (correctly a model is indicated on the corps of printer, but not in a report!), 
  • S/N (Series Namber - written on the corps of printer table behind);
  • CRUM (chip cartridge);
  • Version Firmware.

This infirmation can be found the printing: Configuration Report and Supplies Information Report.

Bring in the data obtained from reports in "Form of Order" in the right column of this page and push the button " Order Now".


Printing of report of Samsung Xpress  SL-M3320ND, SL-M3325ND, SL-M3820D, SL-M3825D, SL-M4020ND, SL-M4025ND

ATTENTION! Printing of report is possible, if a printer is not blocked!

Printing of Сonfiguration Report :

press and retain the button [ Stop ] about 4 seconds (until the indicator of STATUS will not begin to blink), will release the button.

Printing of Supplies Information Report :

press and retain the button [ Stop ] about 6 seconds (until the indicator of STATUS will not begin to burn constantly), will release the button.

Сompatibility Fix Firmware

Models
Firmware
Сompatibility
SL-M3320ND, SL-M3325ND, SL-M3820D, SL-M3825D,
SL-M4020ND, SL-M4025ND
V4.xx.01.01-18
V4.00.51.31, v4.xx.01.19-35
v4.xx.02.07-10
V4.xx.01.18

v4.xx.01.35
V4.00.02.10

Install FIX Firmware reset Samsung SL-M3320

In the got archive

1. At the beginning of load firmware in the printer file First_SL-M3320_v3.xx.01.xx

2. Then in forced mode a Fix_***CRUM****_Second_SL-M3320_v3.00.01.xx of the file.

Included in a force mode for install fix firmware Samsung Xpress SL-M3320ND, SL-M3325ND, SL-M3820D, SL-M3825D, SL-M4020ND, SL-M4025ND

On the turned off printer press and retain the button [STOP]

Switch a printer the button [ POWER ], release the button [ STOP ]


Caution!!! After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.

 

ATTENTION!

The successful install fix firmware is guaranteed only with an original chip in a cartridge!

To Order Fix