Reset Fix Firmware Samsung SL-M2880FW, SL-M2885FW

Instraction for Install Fix Firmware Samsung Xpress  SL-M2880FW, SL-M2885FW

To create Fix firmware Samsung Xpress Series necessary to know:  

  • Model (correctly a model is indicated on the corps of printer, but not in a report!),
  • S/N (Series Namber);
  • CRUM (chip cartridge);
  • Version Firmware.

This infirmation can be found the printing: Configuration Report and Supplies Information Report.

Bring in the data obtained from reports in "Form of Order" in the right column of this page and push the button " Order Now".

Printing of report of Samsung Xpress   SL-M2880FW, SL-M2885FW

From Menu:



Can happen so, that the resource of chip is fully used up and instead of CRUM- of number you will see inscription of "Please replace". In this case  printing of report is possible from service menu. (Teach Mode).

If a printer is blocked, printing of report is possible from service menu (TEACH MODE)!


[ Menu ] [ # ] [ 1 ] [ 9 ] [ 3 ] [ 4 ] [ Menu ] [Report] [Configuratuon] ->
[ Menu ] [ # ] [ 1 ] [ 9 ] [ 3 ] [ 4 ] [ Menu ] [Report] [Supplies] ->

At the complete blocking of vehicle, for printing of report it is necessary to replace a chip in a cartridge on the original working.

After Reset is necessary only refill toner cartridge.

Сompatibility Fix Firmware


SL-M2880FW, SL-M2885FW

Install FIX Firmware reset Samsung SL-M2880FW, SL-M2885FW

In the got archive

1. you connect a printer to the computer.

2. Enter a printer in a force mode of loading of fix firmware.* 

3. Carry a mouse the first file of fix of First _ M2885 _ V3.00.01.xx.hd on usbprns2.ехе

A cantilever must be opened with the testimonies of motion of process (hurrying points). 

Wait till, while a printer will be overloaded. 

4. Repeatedly we enter a printer in a force mode of loading of fix. 

5. Carry a mouse the second file of fix of FIX _ NU _ xxxxxxxxxxxxxxx _ Second _ M2885 _ V3.00.01.xx.hd on usbprns2.ехе Must be reopened cantilever with pointing of motion of process.

Wait till, while a printer will be overloaded. 


Further: to extract a chip from a cartridge or glue up it. A chip needs to be saved as "Key

* Included in a force mode:

on the turned off printer press and retain the button [Stop]. Switch a printer the button [Power], release the button [Power] then [Stop]. Inscription will appear on a display { Press Stop } quickly push the button [Stop]. At successful included in a force mode will appear a report { Wait Image }


The successful install fix firmware is guaranteed only with an original chip in a cartridge!

To Order Fix

Original Firmware

20 M