Reset Fix Firmware Samsung SL-M2670, SL-M2675

Instraction for Install Fix Firmware Samsung Xpress  SL-M2670, SL-M2670F, SL - M2070FN, SL-M2670N, SL-M2670ND, SL-M2675F, SL-M2675FN , SL-M2675N , SL-M2675ND

To create Fix firmware Samsung Xpress Series necessary to know:  

  • Model (correctly a model is indicated on the corps of printer, but not in a report!),
  • S/N (Series Namber);
  • CRUM (chip cartridge);
  • Version Firmware.

This infirmation can be found the printing: Configuration Report and Supplies Information Report.

Bring in the data obtained from reports in "Form of Order" in the right column of this page and push the button " Order Now".

Printing of report of Samsung Xpress   SL-M2670, SL-M2670F, SL - M2070FN, SL-M2670N, SL-M2670ND, SL-M2675F, SL-M2675FN , SL-M2675N , SL-M2675ND

From Menu:



Can happen so, that the resource of chip is fully used up and instead of CRUM- of number you will see inscription of "Please replace". In this case  printing of report is possible from service menu. (Teach Mode).


[ Menu ] [ # ] [ 1 ] [ 9 ] [ 3 ] [ 4 ] [ Menu ] [Report] [Configuratuon] ->
[ Menu ] [ # ] [ 1 ] [ 9 ] [ 3 ] [ 4 ] [ Menu ] [Report] [Supplies] ->

At the complete blocking of vehicle, for printing of report it is necessary to replace a chip in a cartridge on the original working.

After Reset is necessary only refill toner cartridge.

Сompatibility Fix Firmware

SL-M2670F, SL-M2670FN, SL-M2670HN,
SL-M2675F, SL-M2675FN, SL-M2675HN

Install FIX Firmware reset Samsung SL-M2670

In the got archive

If version Firmware your printer below V3.00.01.20, you will not be able to set the new fix firmware. At first it is needed to renew ON your vehicle to the version of V3.00.01.27. For this purpose get an archive with the original firmware is reference to the archive right column on this page. 

Further we sew the first file in Mode of Readiness : we drag the file of sewing of first _ M2670 _ V3.00.01.27.hd on the file of loader of usbprns2
We wait for a printer will not be overloaded while!

Included in a force mode Xpress SL-M2670 / SL-M2670F / SL-M2670FN / SL-M2675F / SL-M2675FN!  

For this purpose: we include with the pinch-off button " FEET", we release a feed then " FEET" and inscription of "Press Stop" will appear on a display. Again we press " FEET". On a display inscription of "Wait image" will appear Now at once we start sewing (doing everything is needed without delays) file of FIX _ XXXXXXXXXXX _ Second _ M2670 _ V3.00.01.27.hd we drag on loader of usbprns2.

Further: to extract a chip from a cartridge or glue up it. A chip needs to be saved as " Key".

After a restart a printer already will work without a chip on a cartridge.

Caution!!! After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.



(choose a model from a sticker to the corps, but not from a report!)

The successful install fix firmware is guaranteed only with an original chip in a cartridge!

To Order Fix