Reset Fix Firmware Samsung SL-M2070, SL-M2070W, SL-M2070F, SL-M2074, SL-M2074W, SL-M2077, SL-M2077W

Instraction for Install Fix Firmware Samsung Xpress  SL-M2070, SL-M2070W, SL-M2070F, SL-M2070FW, SL-M2074, SL-M2074W, SL-M2074F, SL-M2074FW, SL-M2077, SL-M2077W, SL-M2077F, SL-M2077FW

To create Fix firmware Samsung Xpress Series necessary to know:  

  • Model (correctly a model is indicated on the corps of printer, but not in a report!),
  • S/N (Series Namber);
  • CRUM (chip cartridge);
  • Version Firmware.

This infirmation can be found the printing: Configuration Report and Supplies Information Report.

Bring in the data obtained from reports in "Form of Order" in the right column of this page and push the button " Order Now".


Printing of report of Samsung Xpress  SL-M2070, SL-M2070W, SL-M2074, SL-M2074W, SL-M2077, SL-M2077W

From Menu:

MENU->SYSTEM SETUP->REPORT->CONFIGURATION>YES   - (standard)

MENU->SYSTEM SETUP->REPORT->SUPPLIES INFORMATION->YES  - (standard)

Can happen so, that the resource of chip is fully used up and instead of CRUM- of number you will see inscription of "Please replace". In this case  printing of report is possible from service menu. (Teach Mode).

From TEACH MODE:

MENU-BACK-LEFT-RIGHT-ok-STOP/CLEAR-MENU->SYSTEM SETUP->REPORT->CONFIGURATION->YES;

MENU-BACK-LEFT-RIGHT-ok-STOP/CLEAR-MENU->SYSTEM SETUP->REPORT->SUPPLIES INFIRMATION->YES;

At the complete blocking of vehicle, for printing of report it is necessary to replace a chip in a cartridge on the original working.

After Reset is necessary only refill toner cartridge MLT-D111S.

Сompatibility Fix Firmware

Models
Firmware
Сompatibility
SL-M2070
SL-M2070W
V3.00.01.04-16
V3.00.01.20-30
V3.00.01.20
V3.00.01.22-24



SL-M2070F
SL-M2070FW
V3.00.01.04-16
V3.00.01.20-27
V3.00.01.20
V3.00.01.22-24

Install FIX Firmware reset Samsung SL-M2070

In the got archive

1. At the beginning of load firmware in the printer file First_SL-M2070_v3.00.01.xx

2. Then in forced mode a Fix_***CRUM****_Second_SL-M2070_v3.00.01.xx of the file.

Included in a Forced Mode:

For this purpose on the turned off printer press and retain the button [Stop]. Switch a printer the button [Power], release the button [Power] then [Stop]. Inscription will appear on a display { Press Stop } quickly push the button [Stop]. At successful included in a force mode will appear a report { Wait Image }


Caution!!! After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.

 

ATTENTION!

The successful install fix firmware is guaranteed only with an original chip in a cartridge!

To Order Fix