Reset Fix Firmware Samsung SL-M2820

Instraction for Reset Fix Firmware Samsung SL-M2820, SL-M2820ND, SL-M2820DW, SL-M2825ND, SL-M2825DW.

Order Fx Firmware:

To create Fix firmware Samsung Xpress Series necessary to know:

  • Model (correctly a model is indicated on the corps of printer, but not in a report!), 
  • S/N (Series Namber - written on the corps of printer table behind);
  • CRUM (chip cartridge);
  • Version Firmware.

This infirmation can be found the printing: Configuration Report and Supplies Information Report.

Bring in the data obtained from reports in "Form of Order" in the right column of this page and push the button " Order Now".

Printing of report of Samsung Xpress  SL - M2620, SL - M2620W, SL-M2625, SL-M2625W, SL-M2625D, SL-M2625DW, SL-M2625ND, SL-M2626, SL-M2626D

ATTENTION! Printing of report is possible, if a printer is not blocked!

Printing of Сonfiguration Report :

press and retain the button [ Stop ] about 4 seconds (until the indicator of STATUS will not begin to blink), will release the button.

Printing of Supplies Information Report :

press and retain the button [ Stop ] about 6 seconds (until the indicator of STATUS will not begin to burn constantly), will release the button.

Сompatibility Fix Firmware

SL-M2620, SL-M2620D,
SL-M2620ND, SL-M2625,
SL-M2625D, SL-M2625ND,
SL-M2625DW, SL-M2626,

Install FIX Firmware reset Samsung SL-M2620

In the got archive

1. At the beginning of load firmware in the printer file First_SL-M2620_v3.xx.01.xx

2. Then in forced mode a Fix_***CRUM****_Second_SL-M2620_v3.00.01.xx of the file.

Included in a force mode for install fix firmware Samsung Xpress SL - M2620 / SL - M2620W

On the turned off printer press and retain the button [STOP]

Switch a printer the button [ POWER ], release the button [ STOP ]

Caution!!! After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.



The successful install fix firmware is guaranteed only with an original chip in a cartridge!

To Order Fix